2-in-1 Detachable Pole Saw

The distinguish feature that set apart Remington from other brands is its dual feature, It can be used as a pole saw by adjusting flip and lock clamp over  ahead up to 15feet of height, mainly for small branches and of tall tree and pruning purposes, it is also used as chainsaw by using it from guide bar or handle for pruning or cutting of trees, the guide bar is can easily be removed and pole saw can detached

Electric-Corded Chainsaw

The Remington chain-saw has a small corded used for charging purposed it uses 10Amp battery mean you can used 4 hour continuously there is no need of charger as it directly charge from main supply although corded length in up to date models is small and you have to place nearer to sink plugin, plug-off when full charge, over charging may cause discharging problems and therefor reduce the life of motor or battery

Low-Kickback 10-Inch Bar

The low kickback chain saw is design to reduce significantly the effects of kickback by designing  a guards that grip the pruner tree for simplicity the kick saw has more saw tooth than straight chainsaw to reduce the effect of kick back this feature almost comes in all models of Remington due to safety law 2012

Flip And Lock Clamp

Flip and lock feature is used to convert pole saw to chainsaw and vice-versaw when the clamp is flip it unlock the pole and one can adjust the height of pole as required up to 15 feet overhead, once height is adjusted lock the clamp so to grip the pole and lock it for future use, this feature is manual, flip and lock clamp is an additional incentive comes with chainsaw

Tensioner

What does tensioner do? Well there is scenario in which constant use of saw tighten or lossen the chain under these circumstances the tensioner which is in the form of circular tap, may used to tighten or loose chain, clockwise rotation help to loose chain while anticlock wise tighten chain

Throttle/Switch Lockout

Throttle control in conjunction with switch throttle will turn motor on and releasing it will turn motor off,the main purpose of throttle is that the device remain hibernate or turn on but once u need to applied pressure turn down the throttle button and it maintain the steady speed both switches are opposite side of each other while throttle switch facing the user, the switch must be turn on while using and once it turns on throttle may used to shift modes.

There is  a switch control that transfers throttle modes to switch mode and vice-versa

It is necessary because in under pole saw scenario where branches are at some height its bad practice to turn motor at full speed at then move pole to specified height before pruning, the practitioner must lean chainsaw against branch in hibernate position , stand some feet to make inclined angle

Also this feature helps to reduce kickback accident, the motor should be touch tee or pruning substance, and then turns throttle bar on to maintain steady speed

Oil Cap

Oil leaking is one of the disadvantage of  electric chainsaw and many user have open thread to ask for these problems, I recommend to fill oil tank with desired fuel and cover it with cover cap and once work is finished the oil must be drained off from oil tank to avoid from leaking, also don’t used regular fuel that are thin and always tend to reduce efficiency of motor, instead used only oils that comes up with manual.

There is no oil bottle or tank in accessories and there is additional charge for this accessories